Performance Analysis of RIS-Assisted Full-Duplex Communications With Infinite and Finite Blocklength Codes

With the advancement of wireless communication technologies, reconfigurable intelligent surfaces (RISs) have recently paved the way to augmenting the performance of wireless networks with the aid of multiple reflecting surfaces by efficiently attuning the signal reflection through a large number of low-cost passive elements. In this paper, we consider an RIS-aided full-duplex (FD) communication network consisting of a FD access point (AP) that communicates with an uplink and a downlink user simultaneously with the aid of an RIS as well as through the direct link between the AP and users. To evaluate the system performance under infinite blocklength (IBL) and finite blocklength (FBL) codes, we derive the analytical expressions for the outage probability and throughput in case of IBL, and for block-error rate (BLER) and goodput in the case of FBL, for both uplink and downlink transmission. Furthermore, the expressions for the maximum achievable rate under FBL and IBL transmission are derived. Next, we also extend the analysis of the single-user framework to a more practical scenario with multiple users utilizing non-orthogonal multiple access (NOMA) and derive analytical expressions for the outage probability and BLER at each downlink user and at the AP. The accuracy of the derived expressions is validated via simulation results, and insights are provided regarding the impact of the number of reflecting elements and imperfect channel state information (CSI) on the performance of the considered system. Finally, from the comparative analysis, it is shown that the RIS-aided system outperforms the system without RIS in both IBL and FBL scenarios, providing remarkable improvement in the outage probability and BLER.