Power-efficient Antenna Switching and Beamforming Design for Multi-User SWIPT with Non-Linear Energy Harvesting

This paper considers the effective power in downlink a multi-antenna, multi-user single-cell network enabled with simultaneous wireless information and power transfer (SWIPT). The proposed power efficiency problem aims to maximize the harvested energy and minimize transmission power consumption simultaneously. Specifically, the beamforming and antenna selection procedures at the receivers are optimized under minimum data rate requirements. The underlying optimization problem is shown to be an intractable nonlinear programming problem. As a result, a joint beamforming design and antenna selection is performed based on the scheduling chosen for information decoding and energy harvesting. The main problem is decomposed into two subproblems: antenna selection and beamforming, which yields a locally optimal solution. The first subproblem is solved based on the maximum channel gain across all antennas. While the second subproblem is solved via a two-layer iterative structure based on the sum of ratio programming. Simulation results show that the proposed scheme not only improves power efficiency but also enhances energy efficiency. The results also unveil an interesting tradeoff between power and energy efficiency.