Configuration and Debugging Method of Communication between Dispatching Master Station and Substation

In order to solve the problems of heavy manual maintenance and debugging of multi-master station, low accuracy rate, and serious repeated input and check of information between master station and plant station, a method of configuration and debugging of master station communication was proposed. The master station automatically generates the communication point table based on the typical information base, the station does the mapping configuration. The master station remotely calls the station communication network configuration file to check the point table information. On this basis, based on the DL/T 860 replacement service, the automatic transmission acceptance in the station is completed, and the consistency maintenance, check and debugging of the communication configuration of EMS and substation are realized, and the efficiency and correctness of the maintenance and debugging of the communication information of EMS and substation are improved.