Array feed synthesis for correction of reflector distortion and vernier beamsteering

An algorithmic procedure is described for the synthesis of a planar-array for paraboloidal reflectors to provide simultaneously electronic correction of systematic reflector surface distortions as well as a vernier electronic beamsteering capability. Several f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, significant on-axis gain restoration can be achieved with a one-ring (seven-element) array. However, with seven elements, the array parameters that maximize system gain, do not provide uniform beam-steering (+or-1 BW) and an additional ring (19 elements) is required. For arrays either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements in the array yields higher system gain than can be obtained with elements having lower aperture efficiency. Contour plots of the focal-plane fields are also presented for various distortion and beam-scan-angle cases, showing the dynamic nature of the problem.<
>