Network Representation of Conducting Regions in 3-D Finite-Element Description of Electrical Machines

The paper introduces a network description of conducting regions in electrical machines. Resistance models are considered, where loop equations are equivalent to an edge element formulation using the electric vector potential T, as well as conductance models, for which the nodal equations refer to a nodal element description by means of the scalar potential V. Network models for multiply connected regions are derived for both Omega-T-T
₀
and A-T-T
₀
formulations. A network representation of the edge value of potential T
₀
is suggested. Convergence of the iterations of the T-T
₀
method may be accelerated by supplementing equations for the edge values of T
₀
.