Analysis, design and experimental results of a high-frequency power supply for spark erosion

The LC/sub s/C/sub p/ resonant converter finds a new application in an electrical discharge machining (EDM) power supply, which is designed for the purpose of developing small size EDM systems. The switching frequency is tuned to the natural resonant frequency where the converter tends to act as a current source. In this way, three effects are achieved: 1) the necessary over-voltage is generated, first to ionize the dielectric and then to establish the electric discharge, 2) a constant current is supplied during the machining of the workpiece, providing the circuit with inherent protection under short circuit conditions, and 3) overall stability is guaranteed despite the equivalent negative resistance of the dielectric breakdown. The proposed control achieves an optimum and stable operation using tap water as dielectric fluid preventing the generation of undesired impulses and keeping the distance between the electrode and the workpiece within the optimum stable range. The EDM power supply has been validated to perform operations in a nuclear power plant application.