The single-mode condition for silicon-on-insulator optical rib waveguides with large cross section

Results from detailed numerical analyses of the modal characteristics of large-cross-section silicon-on-insulator-based rib waveguides are presented. They highlight for the first time that satisfying widely used design criteria is not sufficient to ensure single-mode behavior. In particular, the geometries that the design formulas predict should be single-mode are shown to support higher order vertical modes that do not couple (leak) into the outer slab region and are thus low loss in nature. Fortunately, a wide range of practical rib geometries still remains for which the leakage loss of modes other than those of EH/sub 00/ and HE/sub 00/ is sufficiently high to make the waveguides effectively single mode for each polarization.