Optimization of the Refractive Index of a Gap Material Used for the 4-layer DOI Detector

We have developed a 4-layer depth-of-interaction (DOI) detector which consists of four layers of scintillation crystal arrays and a position sensitive photomultiplier tube (PS-PMT). To control the behavior of scintillation light in each DOI crystal array, some reflectors between crystals are removed so that all crystal responses in the four layers are expressed in one two-dimensional (2D) position histogram by implementing an Anger-type calculation of the PS-PMT signals. Since the method utilizes spread of scintillation light through the boundary of the crystals with no reflectors, positioning performance in the 2D position histogram depends on the crystal dimensions, the crystal surface finish, and gap materials. In this work, we propose an adjustment method for crystal identification performance of the 4-layer DOI detector by selecting the optimal refractive index for the gap materials between the crystals in which the reflectors are removed. We fabricated single-layer detectors and 4-layer detectors using LYSO scintillators and evaluated the crystal identification performance, while varying the refractive index of the gap materials (by using different optical cements). As a result, we found the 2D position histogram changes as a function of the refractive index of the optical cement between crystals and the optimal refractive indices can be determined for the detector using the LYSO crystals. We concluded that the crystal response of the 2D position histograms can be adjusted and crystal identification performance can be optimized by changing the refractive index of the gap materials.