Application of contact analysis on evaluation of breakdown strength and PD inception field strength of solid-solid interfaces

Interfaces between solid insulating materials are generally weak regions in electrical insulation systems, particularly if the electrical stress is applied in parallel direction. This paper presents a theoretical mechanical model for estimating average size of air-filled voids at the interface as a function of surface roughness and contact pressure. It is argued that the interfacial breakdown strength (BDS) is governed by the discharge inception stress (E
_v
) of the void with the most likely estimated dimension. The estimated values of the breakdown strength and partial discharge inception electric field strength (PDIE) were compared with the results from measurements using XLPE specimens with interfaces energized in longitudinal direction. The measured ratio of increase of breakdown strength was found to be in good agreement with the estimated breakdown values of the most likely interface's void. Additionally, it was found out that the air pressure inside voids was not affected by applied contact pressure. The estimated PDIE values was found to be in agreement with the measured values, in the case of rough surfaces, but not for smooth surfaces. The results indicate that the mechanical contact approach using the motif description of surface roughness may improve the understanding of the factors influencing the PDIE of electrically stressed interfaces.