Microfluidic Three-Electrode Cell Array for Low-Current Electrochemical Detection

This paper reports the implementation and calibration of a microscopic three-electrode electrochemical sensor integrated with a polydimethylsiloxane (PDMS) microchannel to form a rapid prototype chip technology that is used to develop sensing modules for biomolecular signals. The microfluidic/microelectronic fabrication process yields identical, highly uniform, and geometrically well-defined microelectrodes embedded in a microchannel network. Each three-microelectrode system consists of a Au working electrode with a nominal surface area of 9 mum
²
, a Cl
₂
plasma-treated Ag/AgCl reference electrode, and a Au counter electrode. The patterned electrodes on the glass substrate are aligned and irreversibly bonded with a PDMS microchannel network giving a channel volume of 72 nL. The electrokinetic properties and the diffusion profile of the microchannels are investigated under electrokinetic flow and pressure-driven flow conditions. Cyclic voltammetry of 10 mM K
₃
Fe(CN)
₆
in 1 M KNO
₃
demonstrates that the electrode responses in the cell are characterized by linear diffusion. The voltammograms show that the system is a quasi-reversible redox process, with heterogeneous rate constants ranging from 3.11 to 4.94times10
^-3
cm/s for scan rates of 0.1-1 V/s. The current response in the cell is affected by the adsorption of the electroactive species on the electrode surface. In a low-current DNA hybridization detection experiment, the electrode cell is modified with single-stranded thiolated DNA. The electrocatalytic reduction of 27 muM Ru(NH
₃
)
₆

³⁺
in a solution containing 2 mM Fe(CN)
₆

^3-
is measured before and after the exposure of the electrode cell to a 500-nM target DNA sample. The preliminary result showing an increase in the peak current response demonstrates the hybridization-based detection of a complementary target DNA sequence