Voltage modulation factor of the magnetic flux control PWM method for inverter

The voltage modulation factor of the magnetic flux control pulse-width modulation (PWM) method is discussed. The modulation factor is derived from a theoretical study on the flux locus produced from the inverter output voltage. The derivation is based on the fact that the fundamental component of the inverter output voltage is proportional to the radius of the flux locus. It is shown theoretically that the voltage modulation factor is expressed by the content of a zero vector in one cycle of the selected PWM pattern of the space vector expression. The modulation factor of the magnetic flux control PWM method is calculated. The modulation factor can be varied from zero to 12/ pi /sup 2/. The output voltage of the magnetic flux control PWM method can be controlled by the modulation factor linearly from zero up to overmodulation. The simulation and experimental results are also shown.<
>