Effect of Teflon Wrapping on the Interaction Position Reconstruction Resolution in Long, Thin Plastic Scintillator Pillars

An optically-segmented single-volume scatter camera is being developed to image MeV-energy neutron sources. The design employs long, thin, optically isolated organic scintillator pillars with 5 mm × 5 mm × 200 mm dimensions (i.e., an aspect-ratio of 1:1:40). Teflon reflector is used to achieve optical isolation and improve light collection. The effect of Teflon on the ability to resolve the radiation interaction locations along such high aspect-ratio pillars is investigated. It was found that reconstruction based on the amplitude of signals collected on both ends of a bare pillar is less precise than reconstruction based on their arrival times. However, this observation is reversed after wrapping in Teflon, such that there is little to no improvement in reconstruction resolution calculated by combining both methods. It may be possible to use another means of optical isolation that does not require wrapping each individual pillar of the camera.