Corrections to “A Modified CLTdSCR With Low Leakage and Low Capacitance for ESD Protection” [Feb 21 934-937]

In the above article
[1]
,
Fig. 2
contains incorrect labeling. The correct
Fig. 2
is presented here. Referring to this new figure, in the third paragraph of Section III, “C6” and “C10” in the original text should be revised to “C5-1” and “C5-2,” respectively: “In
$m$
-CLTdSCR, C1 and C2, and C5-1 and C5-2 are respectively connected in series and then connected in parallel. The total capacitance can be approximated by the formula of
$\text{C}_{\mathrm {ESD}}\approx \mathrm {C1/C2}$
+C5-1/C5-2, while the total capacitance of of CLTdSCR is about C1/C2 + C6/C8 + C10/C12 + C13/C15 + C9/C14 + C7 + C11.”