Graphical representation of voltage and current measurements in series or parallel RLC resonant circuits for magnification using hyperspectral analysis

Measurement is an act or the result of evaluation between the quantity and a predefined standard. Electrical measurements are the methods, devices and calculations used to measure electrical quantities. Measurement of electrical quantities may be done to measure electrical parameters of a system. Specifying a voltage measurement wants explicit or implicit specification of the points across which the voltage is measured. Whichever two points with the same potential may be connected by a conductor and no current will flow among them. Voltage and Current measurement or monitoring within electronic circuitry is a common requirement covering various types of applications. These may include anything from portable, handheld equipment through to automotive applications. The Current Measurement block is used to measure the instantaneous current flowing in any electrical block or connection line. The Voltage Measurement block measures the prompt voltage between two electric nodes. An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire. Electric current is measured using Series/Parallel RLC resonant circuits using MATLAB Simulink graphical representation. In the future work the different level voltage ciruits data will be tested with Hyperspectral data processing to find out the accurate voltage magnification difference and analyze through signal processing.