Designing pipelined delay lines with dynamically-adaptive granularity for low-energy applications

A calibrated delay line is a key component in many modern digital systems. Traditionally, these lines are designed as real-time pipelines with static granularity, fine enough to handle a worst-case input rate. However, due to their rigid structure, they have sub-optimal energy for low- and varying-rate input streams. We introduce a complete methodology for designing reconfigurable delay lines which dynamically adapt granularity to traffic, on-the-fly, without stalling or disturbing normal operation. These lines have two modes: coarse- and fine-grain. During sparser traffic, the system is reconfigured to coarse-grain mode, thereby reducing total energy, and it reverts to fine-grain mode during denser traffic. In each case, overall delay is preserved. This strategy is especially beneficial for applications where input traffic is highly varied. The particular focus of this paper is on one promising domain, continuous-time digital signal processors (CT DSP's), a new class of processors targeting low-energy applications. The proposed system includes two lightweight asynchronous control blocks: a digital controller to continuously monitor input traffic, and a micropipeline to dynamically reconfigure the entire delay line. With a complete implementation in a 0.13 um IBM CMOS technology, post-layout simulations demonstrate an average overall dynamic power reduction up to 45.5% compared to a non-adaptive design, with only minimal area overhead. The design methodology is modular, supporting extensions to multiple configuration modes to provide even greater power reduction for a variety of input traffic. While results are presented for CT DSP's, significant benefits are also expected in many other domains where delay lines are used.