Scheduled Maintenance on May 23rd, 2017:
IEEE Xplore will undergo an upgrade from 1:00 - 4:00 PM EDT. During this time there may be intermittent impact on performance. We apologize for any inconvenience.
By Topic

# IEEE Transactions on Industrial Electronics

## Filter Results

Displaying Results 1 - 25 of 80

Publication Year: 2011, Page(s):C1 - 3719
| PDF (56 KB)
• ### IEEE Transactions on Industrial Electronics publication information

Publication Year: 2011, Page(s): C2
| PDF (40 KB)
• ### Guest Editorial

Publication Year: 2011, Page(s):3720 - 3722
| PDF (86 KB) | HTML
• ### Computational Algorithms for Induction-Motor Equivalent Circuit Parameter Determination—Part I: Resistances and Leakage Reactances

Publication Year: 2011, Page(s):3723 - 3733
Cited by:  Papers (69)
| | PDF (541 KB) | HTML

This paper deals with methods and algorithms for the estimation of induction-motor equivalent circuit parameters starting from the geometrical and electrical data generally available after an electromagnetic design. The main aim of this paper is to help the readers pass from the theoretical analysis to the numerical code suitable to be included in its own design software. For this reason, the step... View full abstract»

• ### Computational Algorithms for Induction Motor Equivalent Circuit Parameter Determination—Part II: Skin Effect and Magnetizing Characteristics

Publication Year: 2011, Page(s):3734 - 3740
Cited by:  Papers (46)
| | PDF (570 KB) | HTML

This paper proposes methods and algorithms for the estimation of induction motor equivalent circuit parameters, starting from the geometrical and electrical data generally available after an electromagnetic design. This part includes an approach for the skin effect determination in arbitrarily shaped rotor slots, based on the elementary layer method. In addition, a complete analytical development ... View full abstract»

• ### A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent-Magnet Motors

Publication Year: 2011, Page(s):3741 - 3757
Cited by:  Papers (61)
| | PDF (1693 KB) | HTML

This paper reviews many design issues and analysis techniques for the brushless permanent-magnet machine. It reviews the basic requirements for the use of both ac and dc machines and issues concerning the selection of pole number, winding layout, rotor topology, drive strategy, field weakening, and cooling. These are key issues in the design of a motor. Leading-edge design techniques are illustrat... View full abstract»

• ### Design and Analysis of Star–Delta Hybrid Windings for High-Voltage Induction Motors

Publication Year: 2011, Page(s):3758 - 3767
Cited by:  Papers (9)
| | PDF (582 KB) | HTML

In this paper, a Y-Δ hybrid connection for a high-voltage induction motor is described. Low winding harmonic content is achieved by careful consideration of the interaction between the Y- and Δ-connected three-phase winding sets so that the magnetomotive force (MMF) in the air gap is close to sinusoid. Essentially, the two winding sets operate in a six-phase mode. This paper goes on ... View full abstract»

• ### Design of Halbach-Array-Based Permanent-Magnet Motors With High Acceleration

Publication Year: 2011, Page(s):3768 - 3775
Cited by:  Papers (18)
| | PDF (737 KB) | HTML

The Halbach magnetized permanent-magnet (PM) motors can be designed to achieve high torque density and to realize hollow rotor structure with very low rotational inertia. In this paper, the design and analysis of Halbach-array-based PM motors, which can produce high output torque and meet the requirements for very fast dynamic performance, are presented. A design method is proposed to select the o... View full abstract»

• ### Permanent-Magnet Shape Optimization Effects on Synchronous Motor Performance

Publication Year: 2011, Page(s):3776 - 3783
Cited by:  Papers (32)
| | PDF (1150 KB) | HTML

The magnet shape in permanent-magnet (PM) synchronous motors substantially affects the back-electromotive-force (EMF) waveform and the stator iron losses, which are of particular importance in traction applications, where the energy available in the battery box is limited. This paper presents a methodology based on geometry optimization, providing sinusoidal back-EMF waveform. The method has been ... View full abstract»

• ### A Novel Axial Flux Permanent-Magnet Machine for Flywheel Energy Storage System: Design and Analysis

Publication Year: 2011, Page(s):3784 - 3794
Cited by:  Papers (72)
| | PDF (1660 KB) | HTML

This paper presents the design and analysis of a novel axial flux permanent-magnet (AFPM) machine for a flywheel energy storage system (FESS). Its design and control facilitate significant reduction in axial bearing stress and losses. Due to the unconventional flux distribution in this machine, a 3-D finite element method was employed for its design and analysis, including its electromagnetic torq... View full abstract»

• ### Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators

Publication Year: 2011, Page(s):3795 - 3805
Cited by:  Papers (66)
| | PDF (1420 KB) | HTML

Some design and operation aspects of axial flux permanent magnet synchronous machines, wound with concentrated coils, are presented. Due to their high number of poles, compactness, and excellent waveform quality and efficiency, these machines show satisfactory operation at low speeds, both as direct drive generators and as motors. In this paper, after a general analysis of the model and design fea... View full abstract»

• ### Novel Analysis and Design Methodology of Interior Permanent-Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage

Publication Year: 2011, Page(s):3806 - 3814
Cited by:  Papers (16)
| | PDF (915 KB) | HTML

Novel analysis and design methodology using the newly adopted synthetic flux linkage for interior permanent-magnet (PM) synchronous motors (IPMSMs) with a multilayered PM have been proposed. In addition, cross magnetization between the d and q axes in the IPMSM is taken into account via the proposed synthetic flux linkage, which can be identified numerically and experimentally. It is... View full abstract»

• ### Rotor Design for Sensorless Position Estimation in Permanent-Magnet Machines

Publication Year: 2011, Page(s):3815 - 3824
Cited by:  Papers (17)
| | PDF (1110 KB) | HTML

A high-frequency injection sensorless rotor position estimation algorithm is incorporated directly into the finite-element design process to realize a permanent-magnet (PM) machine that is suited to zero- and low-speed sensorless control. The machine design is tightly constrained by an existing stator assembly, only enabling the redesign of the replacement PM rotor, and by the requirement that the... View full abstract»

• ### Faulty Operations of a PM Fractional-Slot Machine With a Dual Three-Phase Winding

Publication Year: 2011, Page(s):3825 - 3832
Cited by:  Papers (35)
| | PDF (1134 KB) | HTML

The permanent-magnet (PM) machine with dual three-phase windings is proposed for applications requiring continuous operating even under a partial fault. The two windings are supplied by two separate inverters. Thus, in the event of a fault of one winding, this is disconnected, and the machine continues to be operated by means of the healthy winding. This paper investigates the PM machine with dual... View full abstract»

• ### Impedance and Emission Optimization of Low-Voltage DC Motors for EMC Compliance

Publication Year: 2011, Page(s):3833 - 3839
Cited by:  Papers (6)
| | PDF (881 KB) | HTML

This paper presents a method to automatically generate high-frequency (HF) generic electrical models for low-voltage dc motors. A software model generator creates an electrical circuit which reproduces both HF impedance and emission spectrum of any common dc motor within a frequency range from 150 kHz to 1 GHz. The impedance and emission spectrum are calculated from construction and material param... View full abstract»

• ### Active $du/dt$—New Output-Filtering Approach for Inverter-Fed Electric Drives

Publication Year: 2011, Page(s):3840 - 3847
Cited by:  Papers (13)
| | PDF (571 KB) | HTML

Active du/dt is a new output-filtering method to mitigate motor overvoltages. The inverter pulse pattern edges are broken down into narrower pulses, which control the filter LC circuit. This results in an output voltage that does not have to exhibit the overshoot typically seen in common LC circuits in output-filtering applications. Furthermore, the shape of the output-... View full abstract»

• ### Rotor Integrity Design for a High-Speed Modular Air-Cored Axial-Flux Permanent-Magnet Generator

Publication Year: 2011, Page(s):3848 - 3858
Cited by:  Papers (21)
| | PDF (1609 KB) | HTML

The rotor integrity design for a high-speed modular air-cored axial-flux permanent-magnet (AFPM) generator is presented. The main focus is on the mechanical parametric optimization of the rotor, which becomes a more dominating design issue over electromagnetic optimization at high operational speeds. Approximate analytical formulas are employed for preliminary sizing of the mechanical parameters o... View full abstract»

• ### Dynamic Torque Analysis of a Wind Turbine Drive Train Including a Direct-Driven Permanent-Magnet Generator

Publication Year: 2011, Page(s):3859 - 3867
Cited by:  Papers (43)
| | PDF (413 KB) | HTML

Mechanical interactions between a wind turbine and a direct-driven permanent-magnet synchronous generator (PMSG) are studied, and a model to analyze the system behavior is suggested. The proposed model can be applied to analyze the mechanical vibrations of direct-driven wind turbine installations both in steady state and in dynamic cases. The cogging torque and torque ripple of the PMSG are used a... View full abstract»

• ### A Multilevel Active-Clamped Converter Topology—Operating Principle

Publication Year: 2011, Page(s):3868 - 3878
Cited by:  Papers (18)  |  Patents (1)
| | PDF (1377 KB) | HTML

This paper presents a novel multilevel active-clamped converter topology, which is an extension to m levels of the three-level active neutral-point-clamped topology. The operating principle is established through the definition of a proper set of switching states and a transition strategy between adjacent switching states. The benefits of the proposed converter topology and control in compa... View full abstract»

• ### A Dual Full-Bridge Resonant Class-E Bidirectional DC–DC Converter

Publication Year: 2011, Page(s):3879 - 3883
Cited by:  Papers (41)  |  Patents (1)
| | PDF (394 KB) | HTML

A new bidirectional dc-dc converter composed of two class-E resonant converters is presented in this paper. Bidirectional power flow is controlled by transistor control pulse frequency changes, with a constant break between the succeeding pulses as in quasi-resonant converters. The boost or buck mode converter operation depends on the mutual relation between the control pulses of the transistor pa... View full abstract»

• ### High-Frequency Link: A Solution for Using Only One DC Source in Asymmetric Cascaded Multilevel Inverters

Publication Year: 2011, Page(s):3884 - 3892
Cited by:  Papers (58)
| | PDF (1767 KB) | HTML

Multilevel inverters are in state-of-the-art power conversion systems due to their improved voltage and current waveforms. Cascaded H-bridge (CHB) multilevel inverters have been considered as an alternative in the medium-voltage converter market and experimental electric vehicles. Their variant, the asymmetrical CHB (ACHB) inverter, optimizes the number of voltage levels by using dc supplies with ... View full abstract»

• ### Robust Deadbeat Control Scheme for a Hybrid APF With Resetting Filter and ADALINE-Based Harmonic Estimation Algorithm

Publication Year: 2011, Page(s):3893 - 3904
Cited by:  Papers (29)
| | PDF (1354 KB) | HTML

A novel hybrid active power filter (HAPF) topology is proposed, which shows advantages of the conventional HAPF and the LCL filter in terms of reduced dc-link voltage, lower switching ripples, and less electromagnetic interference injection. To enhance the noise rejection capability of the digital controller, the resetting filters (RFs) are utilized as prefilters before the analog/digital s... View full abstract»

• ### High Cross-Regulation Multioutput $LLC$ Series Resonant Converter With Magamp Postregulator

Publication Year: 2011, Page(s):3905 - 3913
Cited by:  Papers (15)
| | PDF (824 KB) | HTML

A magnetic amplifier (Magamp) postregulator using a time-sharing control strategy is proposed when using a multioutput LLC series resonant converter. The operating principles of the proposed converter and the Magamp postregulator are analyzed in detail. Furthermore, the design criterion for the Magamp core is presented, and the dead-time problem of the Magamp postregulator is analyzed. Compared wi... View full abstract»

• ### Mitigation of Dynamic, Unbalanced, and Harmonic Voltage Disturbances Using Grid-Connected Inverters With $LCL$ Filter

Publication Year: 2011, Page(s):3914 - 3924
Cited by:  Papers (45)
| | PDF (1541 KB) | HTML

This paper presents a robust and fast control strategy for load-voltage regulation in grid-connected inverters with inductor-capacitor-inductor (LCL) filter. The LCL filter complicates the power circuit dynamics, particularly when the uncertain nature of the grid background distortion and system parameters is considered. Furthermore, grid-voltage control in the presence of LCL... View full abstract»

• ### Generalized Duty-Ratio-Based Pulsewidth Modulation Technique for a Three-to- $k$ Phase Matrix Converter

Publication Year: 2011, Page(s):3925 - 3937
Cited by:  Papers (33)
| | PDF (1925 KB) | HTML

This paper presents a novel topology for a direct ac-ac power converter, called as the “three-to- k” phase matrix converter. The input to the proposed matrix converter configuration is a three-phase fixed voltage and a fixed frequency supply from the grid. The output is a variable voltage and variable frequency ac supply of any number of phases (k phase). However, the d... View full abstract»

## Aims & Scope

IEEE Transactions on Industrial Electronics encompasses the applications of electronics, controls and communications, instrumentation and computational intelligence for the enhancement of industrial and manufacturing systems and processes.

Full Aims & Scope

## Meet Our Editors

Editor-in-Chief
Leopoldo Garcia Franquelo
Escuela Superior de Ingenieros