OPAC Standards
 

To create a link from your Online Public Access Catalog (OPAC), insert the punumber at the end of the standard URL prefix.
For example: http://ieeexplore.ieee.org/servlet/opac?punumber=7

You may also cut and paste the URL directly from the OPAC Link column listed below.

Select a numerical range or letter to narrow your browse of standards.
Format:  
Standard Number Standard Title PU Number Year Published Added To Xplore OPAC Link IEL All Inclusive All Information
Technology		 All Telecommunications All Power
and Energy		 LAN/MAN Software
Engineering		 Power Transmissions
and Distribution		 Power Switchgear,
Circuits and Fuses		 Power Protective
Relaying		 Power Transfomers
(Distribution and Regulating)		 Electromagnetic
Compatibility
300-1988 IEEE standard test procedures for semiconductor charged-particle detectors 2573 1988 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2573 • •                    
301-1976 IEEE standard test procedures for amplifiers and preamplifiers for semiconductor radiation detectors for ionizing radiation 2683 1976 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2683 • •                    
301-1988 IEEE standard test procedures for amplifiers and preamplifiers used with detectors of ionizing radiation 2237 1989 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2237 • •                    
302-1969 IEEE standard methods for measuring electromagnetic field strength for frequencies below 1000 MHz in radio wave propagation 2712 1969 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2712 • •   •               •
303-1991 IEEE recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations 2288 1991 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2288 • •     •              
303-2004 IEEE Std 303 - 2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations 9959 2004 08/01/2005 http://ieeexplore.ieee.org/servlet/opac?punumber=9959 • •     •              
304-1977 IEEE test procedure for evaluation and classification of insulation systems for direct-current machines 2667 1977 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2667 • •     •              
306-1969 IEEE test procedure for charging inductors 2711 1969 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2711 • •     •           •  
307-1969 IEEE standard definitions of terms for solar cells 2710 1969 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2710 • •                    
308-1980 IEEE standard criteria for class 1E power systems for nuclear power generating stations 2448 1980 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2448 • •                    
308-1991 IEEE standard criteria for class 1E power systems for nuclear power generating stations 2907 1992 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2907 • •                    
308-2001 Ieee Standard Criteria For Class 1E Power Systems For Nuclear Power Generating Stations 7753 2002 08/03/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=7753 • •                    
309-1970 IEEE standard test procedure for Geiger-Muller counters 2708 1970 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2708 • •                    
310-1969 IEEE standard for reference-standard electrical resistors 2709 1969 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2709 • • • • •              
311-1970 IEEE standard specification of general-purpose laboratory cathode-ray oscilloscopes 2707 1970 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2707 • • • • •              
312-1977 IEEE standard definitions of terms for communication switching 2666 1977 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2666 • • • •                
314-1971 IEEE standards report on state of the art of measuring. Unbalance transmission-line impedance 2764 1971 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2764 • •   • •     •        
315-1975 Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters) 7737 1993 07/27/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=7737 • • • • •     •     •  
315A-1986 Supplement to graphic symbols for electrical and electronics diagrams (Supplement to ANSI Y32.2-1975, ANSI/IEEE Std 315-1975) 2376 1986 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2376 • • • • •           •  
316-1971 IEEE standard requirements for direct current instrument shunts 2763 1971 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2763 • • • • •              
317-1983 IEEE standard for electric penetration assemblies in containment structures for nuclear power generating stations 2418 1983 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2418 • •                    
319-1971 IEEE standard on magnetostrictive materials: piezomagnetic nomenclature 2762 1971 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2762 • • • • •              
319-1990 IEEE standard on magnetostrictive materials: piezomagnetic nomenclature 2257 1991 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2257 • • • • •              
323-1983 IEEE standard for qualifying Class 1E equipment for nuclear power generating stations 2417 1983 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2417 • •                    
323-2003 IEEE Std. 323 ™ IEEE standard for qualifying class 1E equipment for nuclear power generating stations 8922 2004 02/06/2004 http://ieeexplore.ieee.org/servlet/opac?punumber=8922 • •                    
325-1986 IEEE standard test procedures for germanium gamma-ray detectors 2375 1987 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2375 • •                    
325-1996 IEEE standard test procedures for germanium gamma-ray detectors 4594 1997 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=4594 • •                    
333-1980 IEEE standard for electrical installations on packaging machinery and associated equipment 2559 1980 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2559 • •     •              
334-1974 IEEE Standard For Type Tests Of Continuous Duty Class 1E Motors For Nuclear Power Generating Stations 4559 1974 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=4559 • •                    
334-1994 IEEE standard for qualifying continuous duty class 1E motors for nuclear power generating stations 3123 1994 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=3123 • •                    
334-2006 IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations 4085384 2007 02/05/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4085384 • •                    
P334/D4, Jul 2006 Unapproved IEEE Draft Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations 4039779 2006 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039779   •                    
336-2005 IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities 10660 2006 03/06/2006 http://ieeexplore.ieee.org/servlet/opac?punumber=10660 • •     •              
P336/DH, Oct 2004 Unapproved IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities Replaced by the approved draft 4039809 2004 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039809   •                    
P336/DH, Sep 2006 Draft IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities 4152532 2006 04/10/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4152532   •                    
337-1972 IEEE standard specification format guide and test procedure for linear, single-axis, pendulous, analog torque balance accelerometer 2757 1972 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2757 • •                    
338-1987 IEEE standard criteria for the periodic surveillance testing of nuclear power generating station safety systems 2234 1988 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2234 • •                    
338-2006 IEEE Standard Crieteria for Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems 4231352 2006 06/11/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4231352 • •                    
P338/D4, Sep 2006 Unapproved Draft Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems (ANSI/IEEE Std 338-2006 Revision of ANSI/IEEE Std 338-1987) 4039866 2006 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039866   •                    
344-1987 IEEE recommended practice for seismic qualification of class 1E equipment for nuclear power generating stations 2604 1987 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2604 • •                    
344-2004 IEEE Std. 344 - 2004 IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations 9842 2005 06/13/2005 http://ieeexplore.ieee.org/servlet/opac?punumber=9842 • •                    
P344/D27, Sep 2004 Approved IEEE Draft Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations Replaced by 344-2004 4039899 2004 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039899   •                    
352-1987 IEEE guide for general principles of reliability analysis of nuclear power generating station safety systems 2226 1987 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2226 • •                    
356-1974 IEEE guide for radio methods of measuring earth conductivity 2697 1974 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2697 • •   •               •
356-2001 IEEE Guide for Measurements of Electromagnetic Properties of Earth Media 7887 2002 08/17/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=7887 • •   •               •
367-1987 IEEE recommended practice for determining the electric power station ground potential rise and induced voltage from a power fault 2612 1988 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2612 • • • • •              
367-1996 IEEE recommended practice for determining the electric power station ground potential rise and induced voltage from a power fault 4952 1997 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=4952 • • • • •              
376-1975 IEEE standard for the measurement of impulse strength and impulse bandwidth 2688 1975 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2688 • •   •               •
377-1980 IEEE Recommended practice for measurement of spurious emission from land-mobile communication transmitters 2439 1980 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2439 • •   •               •
378-1986 IEEE standard on network analyzers (100 kHz to 18GHz) 2374 1986 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2374 • •   • •     •        
379-1988 IEEE standard application of the single-failure criterion to nuclear power generating station safety systems 2572 1988 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2572 • •                    
379-1994 IEEE standard application of the single-failure criterion to nuclear power generating station safety systems 3448 1994 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=3448 • •                    
379-2000 IEEE Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems 7301 2001 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=7301 • •                    
381-1977 IEEE standard criteria for type tests of Class 1E modules used in nuclear power generating stations 2664 1977 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2664 • •                    
382-1985 IEEE standard for qualification of actuators for power operated valve assemblies with safety-related functions for nuclear power plants 2429 1985 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2429 • •                    
382-1996 IEEE standard for qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants 4084 1996 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=4084 • •                    
382-2006 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations 4135879 2007 03/26/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4135879 • •                    
P382_D04, Aug 2006 Unapproved IEEE Draft Standard for Qualification for Actuators for Power Operated Valve Assemblies with Safety-Related Functions for Nuclear Power Plants (Revision of IEEE 382-1996) 4039928 2006 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039928   •                    
P382_D05, Sep 2006 Unapproved IEEE Draft Standard for Qualification for Actuators for Power Operated Valve Assemblies with Safety-Related Functions for Nuclear Power Plants (Revision of IEEE 382-1996) 4039961 2006 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039961   •                    
383-1974 IEEE standard for type test of Class IE electric cables, field splices, and connections for nuclear power generating stations 2696 1974 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2696 • •                    
383-2003 IEEE standard for qualifying class 1E electric cables and field splices for nuclear power generating stations 9137 2004 06/21/2004 http://ieeexplore.ieee.org/servlet/opac?punumber=9137 • •                    
384-2008 IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits 4723930 Not Available 12/22/2008 http://ieeexplore.ieee.org/servlet/opac?punumber=4723930 • •                    
P384/D2, Nov 2007 DRAFT Standard Criteria for Independence of Class 1E Equipment and Circuits 4410488 Not Available 12/19/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4410488   •                    
P384/D3, Jul 2008 DRAFT Standard Criteria for Independence of Class 1E Equipment and Circuits 4601608 Not Available 08/14/2008 http://ieeexplore.ieee.org/servlet/opac?punumber=4601608   •                    
386-1985 IEEE standard for separable insulated connector systems for power distribution systems above 600 v 2428 1985 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2428 • •   • •     •        
386-1995 IEEE standard for separable insulated connector systems for power distribution systems above 600 V 3289 1995 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=3289 • •   • •     •        
386-2006 IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V 4119201 2006 03/05/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4119201 • •   • •     •        
P386/D2.3, Jan 2006 Unapproved IEEE Draft Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V (Revision of 386-1995) 4039988 2006 02/09/2007 http://ieeexplore.ieee.org/servlet/opac?punumber=4039988   •   • •     •        
387-1984 An American National Standard IEEE Standard Criteria For, Diesel-generator Units Applied As Standby Power Supplies For Nuclear Power Generating Stations 4598 1984 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=4598 • •     •              
387-1995 IEEE standard criteria for diesel-generator units applied as standby power supplies for nuclear power generating stations 3692 1996 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=3692 • •     •              
388-1992 IEEE standard for transformers and inductors in electronic power conversion equipment 2910 1992 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2910 • •     •           •  
389-1979 IEEE recommended practice for testing electronic transformers and inductors 2637 1979 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2637 • •     •           •  
389-1990 IEEE recommended practice for testing electronic transformers and inductors 2345 1990 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2345 • •     •           •  
389-1996 IEEE recommended practice for testing electronics transformers and inductors 4525 1997 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=4525 • •     •           •  
390-1987 IEEE standard for pulse transformers 2509 1987 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2509 • •     •           •  
393-1977 IEEE standard test procedures for magnetic cores 2663 1977 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2663 • •     •           •  
393-1991 IEEE standard for test procedures for magnetic cores 2864 1992 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2864 • •     •           •  
398-1972 IEEE standard test procedures for photomultipliers for scintillation counting and glossary for scintillation counting field 2756 1972 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2756 • •                    
399-1980 (Brown Book) IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book) 2625 1980 12/10/2002 http://ieeexplore.ieee.org/servlet/opac?punumber=2625 • •     •              
399-1990 (Brown Book) IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book) 2831 1990 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=2831 • •     •              
399-1997 (Brown Book) IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book) 5891 1998 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=5891 • •     •              
309-1999: ANSI N42.3-1999 IEEE standard test procedures and bases for Geiger-Mueller counters 6230 1999 01/01/1988 http://ieeexplore.ieee.org/servlet/opac?punumber=6230 • •                    
  
Indexed by IEE Inspec
© Copyright 2009 IEEE – All Rights Reserved