A calibration system for large-aperture sonar arrays
Sheridan, C.
Honeywell Marine Systems Div., Seattle, WA, USA;
This paper appears in: OCEANS 1984
Publication Date: Sep 1973
Volume: 5,
On page(s): 470- 474
Current Version Published: 2003-01-29
Abstract
Acoustic calibration of a large-aperture, low-frequency sonar array presented several problems not normally encountered in conventional sonar array calibration:bulletFar-field measurements were not possible due to sound field refraction from warm water near the surface.bulletPulse separation of surface reflections couldn't be used due to the free-time/pulse-length ratio.bulletRotator shaft indexing for beam patterns was not feasible due to barge motion and extreme hydrophone separation. A calibration system was designed and built which utilized quasi-far-field measurements with a directional' transducer and an auxiliary acoustic angular position reference system. The system was installed and used to obtain transmit and receive beam pattern and response data with calibration accuracy close to conventional techniques.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
