EMC-aware design on a microcontroller for automotive applications
Doriol, P.J.
Villavicencio, Y.
Forzan, C.
Rotigni, M.
Graziosi, G.
Pandini, D.
STMicroelectronics, Agrate Brianza;
Abstract
In modern digital ICs, the increasing demand for performance and throughput requires operating frequencies of hundreds of megahertz, and in several cases exceeding the gigahertz range. Following the technology scaling trends, this request will continue to rise, thus increasing the electromagnetic interference (EMI) generated by electronic systems. The enforcement of strict governmental regulations and international standards, mainly (but not only) in the automotive domain, are driving new efforts towards design solutions for electromagnetic compatibility (EMC). Hence, EMC/EMI is rapidly becoming a major concern for high-speed circuit and package designers. The on-chip power rail noise is one of the most detrimental sources of electromagnetic (EM) conducted emissions, since it propagates to the board through the power and ground I/O pads. In this work we investigate the impact of power rail noise on EMI, and we show that by limiting this noise source it is possible to drastically reduce the conducted emissions. Furthermore, we present a transistor-level lumped-element simulation model of the system power distribution network (PDN) that allows chip, package, and board designers to asses the power integrity and predict the conducted emissions at critical chip I/O pads. The experimental results obtained on an industrial microcontroller for automotive applications demonstrate the effectiveness of our approach.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
