A Resolver Angle Estimator Based on Its Excitation Signal
Ben-Brahim, L.
Benammar, M.
Alhamadi, M.A.
Dept. of Electr. Eng., Qatar Univ., Doha;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: Feb. 2009
Volume: 56,
Issue: 2
On page(s): 574-580
ISSN: 0278-0046
INSPEC Accession Number: 10459841
Digital Object Identifier: 10.1109/TIE.2008.2002719
First Published: 2008-08-15
Current Version Published: 2009-02-02
Abstract
A resolver generates a pair of signals proportional to the sine and cosine of the angular position of its shaft. A new low-cost method for converting the amplitudes of these sine/cosine transducer signals into a measure of the input angle without using lookup tables is proposed. The new method takes advantage of the components used to operate the resolver, the excitation (carrier) signal in particular. This is a feedforward method based on comparing the amplitudes of the resolver signals to those of the excitation signal together with another shifted by pi/2. A simple method is then used to estimate the shaft angle through this comparison technique. The poor precision of comparison of the signals around their highly nonlinear peak regions is avoided by using a simple technique that relies only on the alternating pseudolinear segments of the signals. This results in a better overall accuracy of the converter. Beside simplicity of implementation, the proposed scheme offers the advantage of robustness to amplitude fluctuation of the transducer excitation signal.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
