–-Coordinate-Based Power-Assist Control of Electric Wheelchair for a Caregiver
Miyata, J.
Kaida, Y.
Murakami, T.
Dept. of Syst. Design Eng., Keio Univ., Yokohama;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: June 2008
Volume: 55,
Issue: 6
On page(s): 2517-2524
ISSN: 0278-0046
INSPEC Accession Number: 10006658
Digital Object Identifier: 10.1109/TIE.2008.918630
Current Version Published: 2008-05-28
Abstract
This paper describes the power-assist control of an electric wheelchair according to the motion mode of a caregiver. In past research work, with respect to the power-assist motion of a wheelchair, the controllers for wheelchair operators have been considered. However, caregivers are aging as well as the cared people due to the growing proportion of elderly people. This means that the power-assist control for caregivers will be strongly required in the near future. To address this issue, this paper proposes a force sensorless power-assist control for the caregiver. To detect the caregiver's input, the estimation observer of reactive acceleration is constructed in the nu-Phi coordinate. Then, the motion of the wheelchair is classified into straight or cornering modes by the rotational velocity calculated from the Phi component of reactive acceleration. Furthermore, the power-assist motion control is realized on each mode by using the translational velocity calculated from the nu component of reactive acceleration. This reactive-acceleration-based power-assist control in the nu-Phi coordinate is a novel approach in wheelchair controls. Numerical simulations and experiments are carried out to show the validity of the proposed method.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
