Shunt Active-Power-Filter Topology Based on Parallel Interleaved Inverters
Asiminoaei, L.
Aeloiza, E.
Enjeti, P.N.
Blaabjerg, F.
Danfoss, Graasten;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: March 2008
Volume: 55,
Issue: 3
On page(s): 1175-1189
ISSN: 0278-0046
INSPEC Accession Number: 9897223
Digital Object Identifier: 10.1109/TIE.2007.907671
Current Version Published: 2008-03-03
Abstract
In this paper, an interleaved active-power-filter concept with reduced size of passive components is discussed. The topology is composed of two pulsewidth-modulation interleaved voltage-source inverters connected together on the ac line and sharing the same dc-link capacitor. The advantages of the proposed approach are as follows: 1. significant reduction in the linkage inductors' size by decreasing the line-current ripple due to the interleaving; 2. reduction of the switching stress in the dc-link capacitor, due to the shared connection; and 3. more accurate compensation for high-power applications, because the power sharing allows one to use a higher switching frequency in each inverter. This paper analyzes the design of the passive components and gives a practical and low-cost solution for the minimization of the circulation currents between the inverters, by using common-mode coils. Several simulation results are discussed, and experimental results with a three-phase 10-kVA 400-V unit are obtained to validate the theoretical analysis.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
