Comparison of Prediction Techniques to Compensate Time Delays Caused by Digital Control of a Three-Phase Buck-Type PWM Rectifier System
Nussbaumer, T.
Heldwein, M.L.
Guanghai Gong
Round, S.D.
Kolar, J.W.
Swiss Federal Inst. of Technol. (ETH), Zurich;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: Feb. 2008
Volume: 55,
Issue: 2
On page(s): 791-799
ISSN: 0278-0046
INSPEC Accession Number: 9748417
Digital Object Identifier: 10.1109/TIE.2007.909061
Current Version Published: 2008-01-31
Abstract
The digital control of a three-phase three-switch buck-type rectifier system is analyzed in this paper. Three main sources of time delays in the control loop can be identified for the implementation on a digital signal processor (DSP): 1) the delay time due to the sampling of the control quantities; 2) the one due to the calculation time of the DSP; and 3) the one due to the sample-and-hold function of the pulsewidth modulator. Using the buck-type system as an example, the influence of the time delay on the stability of the inner current control loop is discussed, and two prediction methods for time-delay compensation, i.e., a linear prediction and the Smith prediction, are comparatively evaluated. The control performance and the effect of the delay times and the prediction methods are shown by simulation results and through measurements on a 5-kW prototype.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
