 |
|
| |
Packet Switched vs. Time Multiplexed FPGA Overlay Networks
Kapre, N.
Mehta, N.
deLorimier, M.
Rubin, R.
Barnor, H.
Wilson, M.J.
Wrighton, M.
DeHon, A.
Dept. of Comput. Sci., California Inst. of Technol., Pasadena, CA;
This paper appears in: Field-Programmable Custom Computing Machines, 2006. FCCM '06. 14th Annual IEEE Symposium on
Publication Date: 24-26 April 2006
On page(s): 205-216
Location: Napa, CA,
ISBN: 0-7695-2661-6
INSPEC Accession Number: 9274756
Digital Object Identifier: 10.1109/FCCM.2006.55
Current Version Published: 2006-12-11
|
|
|
|
Dedicated, spatially configured FPGA interconnect is efficient for applications that require high throughput connections between processing elements (PEs) but with a limited degree of PE interconnectivity (e.g. wiring up gates and datapaths). Applications which virtualize PEs may require a large number of distinct PE-to-PE connections (e.g. using one PE to simulate 100s of operators, each requiring input data from thousands of other operators), but with each connection having low throughput compared with the PE's operating cycle time. In these highly interconnected conditions, dedicating spatial interconnect resources for all possible connections is costly and inefficient. Alternatively, we can time share physical network resources by virtualizing interconnect links, either by statically scheduling the sharing of resources prior to runtime or by dynamically negotiating resources at runtime. We explore the tradeoffs (e.g. area, route latency, route quality) between time-multiplexed and packet-switched networks overlayed on top of commodity FPGAs. We demonstrate modular and scalable networks which operate on a Xilinx XC2V6000-4 at 166MHz. For our applications, time-multiplexed, offline scheduling offers up to a 63% performance increase over online, packet-switched scheduling for equivalent topologies. When applying designs to equivalent area, packet-switching is up to 2times faster for small area designs while time-multiplexing is up to 5times faster for larger area designs. When limited to the capacity of a XC2V6000, if all communication is known, time-multiplexed routing outperforms packet-switching; however when the active set of links drops below 40% of the potential links, packet-switched routing can outperform time-multiplexing
|
|
|
|
Index
Terms
Available to subscribers and IEEE members. |
|
|
|
References
Available to subscribers and IEEE members. |
|
|
|
Citing Documents
Available to subscribers and IEEE members. |
|
|
Cart
