Differential Mode Input Filter Design for a Three-Phase Buck-Type PWM Rectifier Based on Modeling of the EMC Test Receiver
Nussbaumer, T.
Heldwein, M.L.
Kolar, J.W.
Power Electron. Syst. Lab., Swiss Fed. Inst. of Technol., Zurich;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: Oct. 2006
Volume: 53,
Issue: 5
On page(s): 1649-1661
ISSN: 0278-0046
INSPEC Accession Number: 9167393
Digital Object Identifier: 10.1109/TIE.2006.881988
Current Version Published: 2006-10-02
Abstract
For a three-phase buck-type pulsewidth modulation rectifier input stage of a high-power telecommunications power supply module, a differential-mode (DM) electromagnetic compatibility (EMC) filter is designed for compliance to CISPR 22 Class B in the frequency range of 150 kHz-30 MHz. The design is based on a harmonic analysis of the rectifier input current and a mathematical model of the measurement procedure including the line impedance stabilization network (LISN) and the test receiver. Guidelines for a successful filter design are given, and components for a 5-kW rectifier prototype are selected. Furthermore, formulas for the estimation of the quasi-peak detector output based on the LISN output voltage spectrum are provided. The damping of filter resonances is optimized for a given attenuation in order to facilitate a higher stability margin for system control. Furthermore, the dependence of the filter input and output impedances and the attenuation characteristic on the inner mains impedance are discussed. As experimentally verified by using a three-phase common-/Differential-Mode separator, this procedure allows accurate prediction of the converter DM conducted emission levels and therefore could be employed in the design process of the rectifier system to ensure compliance to relevant EMC standards
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
