Novel 20-MW downhill conveyor system using three-level converters
Rodriguez, J.
Pontt, J.
Alzarnora, G.
Becker, N.
Einenkel, O.
Weinstein, A.
Dept. of Electron., Univ. Tecnica Federico Santa Maria;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: Oct 2002
Volume: 49,
Issue: 5
On page(s): 1093- 1100
ISSN: 0278-0046
INSPEC Accession Number: 7413703
Digital Object Identifier: 10.1109/TIE.2002.803223
Current Version Published: 2002-11-07
Abstract
This paper presents a very new drive system used to transport ore from the mine down to the concentrator plant in the copper mine "Los Pelambres". Eight 2500-kW motors are driven by three-level inverters with gate-turn-off thyristors (GTOs). A three-level active front end is used at the input side of each inverter. A GTO chopper is used to provide controlled electrical braking in case of line loss. The paper presents the requirements and alternatives for the drive system and the control strategies for the converters and the belt. A novel application of the selective harmonic elimination method is used to reduce the input current harmonics. Special attention is dedicated to the interaction with the electrical network. The most relevant features of the system are: (1) fuseless operation; (2) adjustable power factor; (3) reduced input current harmonics; (4) smooth transition between motoring and regenerating modes; and (5) 15 MW of regenerated power with more than six months of successful operation.
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
