Analysis and prediction of inverter switching frequency in directtorque control of induction machine based on hysteresis bands andmachine parameters
Kang, J.-W.
Sul, S.-K.
Yaskawa Electr. Manuf. Co. Ltd., Kitakyushu;
This paper appears in: Industrial Electronics, IEEE Transactions on
Publication Date: Jun 2001
Volume: 48,
Issue: 3
On page(s): 545-553
ISSN: 0278-0046
References Cited: 10
CODEN: ITIED6
INSPEC Accession Number: 6951728
Digital Object Identifier: 10.1109/41.925581
Current Version Published: 2002-08-07
Abstract
In this paper, the influences of the hysteresis bands on the
direct torque control (DTC) of an induction motor are analytically
investigated, and the switching frequency of the inverter is predicted
based on the analysis. The flux and torque hysteresis bands are the only
gains to be adjusted in DTC, and the inverter switching frequency and
the current waveform are greatly influenced by them. Therefore, the
magnitude of the hysteresis band should be determined based on
reasonable guidelines which can avoid excessive inverter switching
frequency and current harmonics in the whole operating region. This
paper predicts the inverter switching frequency according to torque and
flux hysteresis bands based on induction machine parameters and control
sampling period, and investigates the effect of hysteresis bands to line
current harmonics. The simulated and experimental results prove the
usefulness and feasibility of the proposed method
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.
Cart
