Spliced Video and Buffering Considerations for Tune-In Time Minimization in DVB-H for Mobile TV
Rezaei, M.
Hannuksela, M.M.
Vadakital, V.K.M.
Gabbouj, M.
Tampere Univ. of Technol.;
Abstract
A novel video splicing method is proposed which minimizes the tune-in time of mobile TV in digital video broadcasting for handheld terminals (DVB-H). DVB-H uses a time-sliced transmission scheme to reduce the power consumption used for radio reception. Tune-in time in DVB-H refers to the time between the start of the reception of a broadcast signal and the start of the media rendering. One of the significant factors in tune-in time is the time from the start of media decoding to the start of correct output from decoder, which can be minimized when a time-slice is started with a random access point picture such as an independent decoding refresh (IDR) picture in H.264/AVC. In IP datacasting (IPDC) over DVB-H, the encapsulation to time-slices is performed independently from encoding in a network element called IP encapsulator. At the time encoding, time-slice boundaries are not known exactly, and it is impossible to govern the location of IDR pictures relative to time-slice boundaries. It is proposed that an additional stream consisting of IDR pictures only is transmitted to the IP encapsulator, which replaces pictures in a normal bitstream with IDR pictures according to time-slice boundaries in order to achieve the minimum tune-in time. It has to be ensured that the "spliced" stream resulting from the operation of the IP encapsulator complies with the hypothetical reference decoder (HRD) specification of H.264/AVC. The buffering requirements of spliced stream are analyzed and then a video rate control system is proposed to satisfy the HRD requirements for the spliced stream. Simulation results show that in addition to fulfilling HRD compliancy, good average quality of decoded video is achieved with minimum tune-in time
Index
Terms
Available to subscribers and IEEE members.
References
Available to subscribers and IEEE members.
Citing Documents
Available to subscribers and IEEE members.