Evaluation of the Current-Limiting Properties for a Superconducting Current-Limiting Element With the Winding Direction of the Reactor of the Second Coil

The 2Generation (2G) high-temperature superconductivity (HTS) coated conductor has such advantages in the manufacture of current-limiting devices as fast phase transition, high critical current density, small degradation of critical characteristics under mechanical deformation, and lower cost of the manufacture of the superconducting current-limiting element due to its lower material cost compared to that of the Y-Ba-Cu-O (YBCO) thin film and the Bi-Sr-Ca-Cu-O (BSCCO) wire and bulk. However, in a resistive-type superconducting fault current limiter that was manufactured with a current-limiting device produced with a 2G HTS coated conductor, the dimensions of the current-limiting device will be larger than those of other devices (e.g., a YBCO thin film and a BSCCO bulk) due to the physical characteristics of the 2G HTS coated conductor. Moreover, application of such resistive-type superconducting fault current limiter to an actual power system will produce high cooling expenses. Therefore, in this study, the electric-coupling condition for the reduction of the size of the superconducting current-limiting element was presented, a superconducting current-limiting element was manufactured using a 2G HTS coated conductor with a stainless-steel stabilization layer, and the manufactured superconducting current-limiting element was applied to the electric-coupling condition to evaluate its stability and current-limiting performance under such condition. The electric-coupling condition that was presented in this paper is the series connection of the primary coil (N
₁
) and the secondary coil (N
₂
), and the parallel connection of the secondary coil and the superconductive element.