Development of $\hbox{Nb}_{3}\hbox{Sn}$ Superconducting Coil Manufacture Technology

The nuclear magnetic resonance superconducting magnet technology is being developed in our laboratory. Because the upper critical magnetic field of NbTi alloy is not high enough, an Nb
₃
Sn superconductor has to be used in the manufacture of magnets for 500 MHz and above. In this paper, an experimental Nb
₃
Sn superconducting coil was manufactured to study the fabrication technology. The bobbin with Al
₂
O
₃
ceramic coating is made of stainless steel. A vertical tube type vacuum heat treatment furnace was established for Nb
₃
Sn formation. Heat treatment parameters for the Nb
₃
Sn coil were done at 670
^°
C in vacuum. Vacuum pressure impregnation was done to strengthen the assembly. The Nb
₃
Sn coil, the switch, and the current leads were joined together using superconducting solder matrix replacement method. In the test the maximum current of the Nb
₃
Sn coil was 263 A, corresponding to a central magnetic field of 3.47 T. Persistent current mode operation was also successfully performed.