Referenced Items are not available for this document.
The feasibility of using magnetic Barkhausen emission (MBE) measurement for the evaluation of wear-induced material loss in case-hardened steel is examined in this paper. MBE measurements were carried out on two case hardened carburized steel disks. The MBE signals from the carburized material were significantly different from the base metal. On both disks it was observed that the MBE level increased as material was removed and the remaining case depth decreased. One of these disks had been polished to remove most of the grinding stress, the other had not. A difference was noticed between the results on the two disks which was attributed to the effect of residual stress
Published in:
Magnetics, IEEE Transactions on
(Volume:36
,
Issue:
5
)
Date of Publication: Sep 2000
- Page(s):
- 3602 - 3604
- ISSN :
- 0018-9464
- INSPEC Accession Number:
- 6883671
- Digital Object Identifier :
- 10.1109/20.908914
- Product Type:
- Journals & Magazines
- Date of Current Version :
- 06 August 2002
- Issue Date :
- Sep 2000
- Sponsored by :
- IEEE Magnetics Society
About IEEE Xplore | Contact | Help | Terms of Use | Nondiscrimination Policy | Site Map | Privacy & Opting Out of Cookies
A not-for-profit organization, IEEE is the world's largest professional association for the advancement of technology.
© Copyright 2013 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.
