High speed electrical characterization and simulation of a pin grid array package

A 181 pin Pin Grid Array (PGA) was characterized using time and frequency domain techniques to identify major sources of signal degradation. The pins, as well as a layer of plating lines that was included for electroplating the exterior metal surfaces, were found to have a deleterious effect on the signal transmission within the package. In addition, a ground delay resulting from the separation of the signal pin and its nearest ground pin was seen to cause significant degradation in signal lines whose pin was far from a ground I/O. For signal lines that are geometrically equivalent due to package symmetry, this effect was seen to increase with increasing signal/nearest ground pin distance, resulting in as much as a 79% increase in the package risetime in some lines. These effects were simulated using a model whose elements were based on actual physical structures, within the package and whose parameters were derived from experimental measurements.<
>