Parametric Inversion Technique for Location of Cylindrical Structures by Cross-Hole Measurements

A new parametric inversion technique to locate cylindrical structures has been developed for borehole radar cross-hole measurements. The technique calculates prediction errors, focusing on curve shapes of first-arrival times, and explicitly uses known parameters on a target. Two schemes to compare the measured first-arrival time curves with the calculated ones are proposed. One is by taking the errors between curve gradients of measured and calculated first-arrival times, and the other is by taking the cross correlation between calculated first-arrival times and measured data. The schemes do not need to select the true first-arrival times, which makes this inversion technique robust and easy to use. This technique is validated with synthetic data sets modeling a metallic pipe in homogeneous and heterogeneous medium models. By both models, the inversion technique is able to retrieve the exact location of the pipe, though it employs a rather simple forward model, which can be solved by only geometrical calculations. The technique is applied to measured data sets, and it successfully estimates a pipe location in good agreement with known information. The inversion is also used for an air-filled subsurface cavity with a very simplified forward model, which considers only Snell's law at the cavity-subsurface media interface. It is also able to locate the cavity at a similar location estimated by other conventional techniques