Skip to Main Content
Integration of front-end electronics with 2D capacitive micromachined ultrasonic transducer (CMUT) arrays has been a challenging issue due to the small element size and large channel count. We present design and verification of a front-end drive-readout integrated circuit for 3D ultrasonic imaging using 2D CMUT arrays. The circuit cell dedicated to a single CMUT array element consists of a high-voltage pulser and a low-noise readout amplifier. To analyze the circuit cell together with the CMUT element, we developed an electrical CMUT model with parameters derived through finite element analysis, and performed both the pre- and postlayout verification. An experimental chip consisting of 4 /spl times/ 4 array of the designed circuit cells, each cell occupying a 200 /spl times/ 200 /spl mu/m/sup 2/ area, was formed for the initial test studies and scheduled for fabrication in 0.8 /spl mu/m, 50 V CMOS technology. The designed circuit is suitable for integration with CMUT arrays through flip-chip bonding and the CMUT-on-CMOS process.
Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on (Volume:52 , Issue: 12 )
Date of Publication: Dec. 2005