Skip to Main Content
Manufacturing test is carried-out once to ensure the correct operation of the circuit under test right after fabrication, while testing is carried-out periodically to ensure that the circuit under test continues to operate correctly on the field. The use of offline built-in self-test (BIST) techniques for periodic testing imposes the interruption of the normal operation of the circuit under test. On the other hand, the use of input vector monitoring concurrent BIST techniques for periodic testing provides the capability to perform the test, while the circuit under test continues to operate normally. In this paper, a novel input-vector monitoring concurrent BIST technique for combinational circuits based on a self-testing RAM, termed R-CBIST, is presented. The presented technique compares favorably to the other input vector monitoring concurrent BIST techniques proposed so far with respect to the hardware overhead, and the time required for the concurrent test to be completed (concurrent test latency). R-CBIST can be utilized to test ROM because it results in small hardware overhead, whereas there is no need to stop the ROM normal operation.