By Topic

A 9-Bit 150-MS/s Subrange ADC Based on SAR Architecture in 90-nm CMOS

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
6 Author(s)
Ying-Zu Lin ; Dept. of Electr. Eng., Nat. Cheng Kung Univ., Tainan, Taiwan ; Chun-Cheng Liu ; Guan-Ying Huang ; Ya-Ting Shyu
more authors

This paper presents a 9-bit subrange analog-to-digital converter (ADC) consisting of a 3.5-bit flash coarse ADC, a 6-bit successive-approximation-register (SAR) fine ADC, and a differential segmented capacitive digital-to-analog converter (DAC). The flash ADC controls the thermometer coarse capacitors of the DAC and the SAR ADC controls the binary fine ones. Both theoretical analysis and behavioral simulations show that the differential non-linearity (DNL) of a SAR ADC with a segmented DAC is better than that of a binary ADC. The merged switching of the coarse capacitors significantly enhances overall operation speed. At 150 MS/s, the ADC consumes 1.53 mW from a 1.2-V supply. The effective number of bits (ENOB) is 8.69 bits and the effective resolution bandwidth (ERBW) is 100 MHz. With a 1.3-V supply voltage, the sampling rate is 200 MS/s with 2.2-mW power consumption. The ENOB is 8.66 bits and the ERBW is 100 MHz. The FOMs at 1.3 V and 200 MS/s, 1.2 V and 150 MS/s and 1 V and 100 MS/s are 27.2, 24.7, and 17.7 fJ/conversion-step, respectively.

Published in:

Circuits and Systems I: Regular Papers, IEEE Transactions on  (Volume:60 ,  Issue: 3 )