Scheduled System Maintenance:
On April 27th, single article purchases and IEEE account management will be unavailable from 2:00 PM - 4:00 PM ET (18:00 - 20:00 UTC).
We apologize for the inconvenience.
By Topic

Thickness Dependence of Structural and Superconducting Properties of Single-Crystal-Like GdBCO Films Prepared by Photo-Assisted MOCVD

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
5 Author(s)
Wei Li ; State Key Lab. on Integrated Optoelectron., Jilin Univ., Changchun, China ; Shanwen Li ; Guoxing Li ; Baolin Zhang
more authors

High-quality GdBa2Cu3O7-δ (GdBCO) films with thicknesses of 0.14-1.62 μm were deposited on (100)-oriented LaAlO3 substrates by photo-assisted metal-organic chemical vapor deposition technique. Evaluation of film microstructure and strain-relaxation phenomenon in the growing films and their effects on the crystallographic and superconducting properties of the GdBCO films have been investigated. A single-crystal-like cross-sectional morphology with dense and crack-free surface and no grain boundary visible was observed. The c-axis lattice parameters of the GdBCO films grown with different thicknesses were used to determine the out-of-plane strain. The result shows that the strain could be gradually relieved as film thickness increases. Highly biaxially textured GdBCO films have been obtained. For a 0.31-μm GdBCO film sample, the full-widths at half-maximum were 0.08° and 0.47° for out-of-plane and in-plane orientations, respectively. Such low values were similar to that of single-crystal GdBCO. The highest critical current density (Jc) value is ~ 2.5MA/cm2 (77 K and 0 T). As films were getting thicker, their Jc values decrease gradually. This is mainly attributed to a lack of pinning centers in the thicker films.

Published in:

Applied Superconductivity, IEEE Transactions on  (Volume:23 ,  Issue: 2 )