Scheduled System Maintenance:
Some services will be unavailable Sunday, March 29th through Monday, March 30th. We apologize for the inconvenience.
By Topic

Leakage and Aging Optimization Using Transmission Gate-Based Technique

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
3 Author(s)
Ing-Chao Lin ; Dept. of Comput. Sci. & Inf. Eng., Nat. Cheng Kung Univ., Tainan, Taiwan ; Chin-Hong Lin ; Kuan-Hui Li

Negative bias temperature instability (NBTI), which can degrade the switching speed of PMOS transistors, has become a major reliability challenge. Reducing leakage consumption is one of the major design goals. The gate replacement (GR) technique is an effective way to reduce both the NBTI effect and leakage. This technique, however, has less flexibility because the replaced gate can only produce one output value and careful algorithms are needed to decide the output value of the replaced gate. In this paper, we propose a novel transmission gate-based technique to minimize NBTI-induced degradation and leakage. This technique, which can offer logic 1 for NBTI mitigation and logic 0 for leakage reduction, provides higher flexibility, as compared to the GR technique. Simulation results show that our proposed technique has up to 20× and 2.16×, on average, improvement on NBTI-induced degradation with comparable leakage power reduction. With a 19.19% area penalty, combining our technique and the GR can reduce 17.92% of the total leakage power and 32.36% of NBTI-induced circuit degradation.

Published in:

Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on  (Volume:32 ,  Issue: 1 )