By Topic

A 10 Gb/s Linear Burst-Mode Receiver in 0.25 \mu m SiGe:C BiCMOS

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
8 Author(s)
Ossieur, P. ; Tyndall Nat. Inst., Univ. Coll. Cork, Cork, Ireland ; Quadir, N.A. ; Porto, S. ; Antony, C.
more authors

This paper presents a 10 Gb/s burst-mode receiver (BMRx) that was designed to have high linearity over a >; 20 dB (optical power) dynamic range. Such a linear BMRx (LBMRx) enables electronic dispersion compensation or multilevel modulation formats in bursty optical links. The LBMRx consists of a variable-gain transimpedance amplifier and a variable-gain post-amplifier. A gain from 47 dBΩ to 85 dBΩ was achieved on a single die. Fast (<; 50ns) gain adjustment is achieved using replica based, feedforward automatic gain control and peak detectors, which are reset between bursts using an external reset signal. A sensitivity of - 23.2 dBm at a bit-error rate of 1.1 × 10-3 was measured using a PIN photodiode. A 0.5 dB penalty is incurred if a 0 dBm burst precedes the burst under consideration; hence the LBMRx can support a dynamic range of 22.7 dB. A 150 ns preamble was used, the guard time between bursts was 25.6 ns. Total harmonic distortion (at 250 MHz) less than 5% was measured for an optical power ranging from - 25&nbsp;dBm to 0 dBm. The chip was designed in a 0.25 μm SiGe:C BiCMOS technology, has an area of 2.4 × 2.1 mm2 and consumes 650 mW from 2.5 V/3.3 V supplies.

Published in:

Solid-State Circuits, IEEE Journal of  (Volume:48 ,  Issue: 2 )