By Topic

Thermal Performance Comparison of Thick-Film Insulated Aluminum Substrates With Metal Core PCBs for High-Power LED Modules

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

Formats Non-Member Member
$33 $13
Learn how you can qualify for the best price for this item!
Become an IEEE Member or Subscribe to
IEEE Xplore for exclusive pricing!
close button

puzzle piece

IEEE membership options for an individual and IEEE Xplore subscriptions for an organization offer the most affordable access to essential journal articles, conference papers, standards, eBooks, and eLearning courses.

Learn more about:

IEEE membership

IEEE Xplore subscriptions

6 Author(s)
Eveliina Juntunen ; VIT Technical Research Centre of Finland, Oulu, Finland ; Aila Sitomaniemi ; Olli Tapaninen ; Ryan Persons
more authors

Evolution of lumens per watt efficacy has enabled exponential growth in light-emitting diode (LED) lighting applications. However, heat management is a major challenge for an LED module design due to the necessity to conduct heat away from the LED chip. Elevated chip temperatures cause adverse effects on LED performance, lifetime, and color. This paper compares the thermal performance of high-power LED modules made with two types of circuit boards: novel substrates based on insulated aluminum material systems (IAMSs) technology that inherently allows using thermal vias under the LEDs and traditional metal core printed circuit boards (MCPCBs) commonly used with high-power LED applications. IAMS is a thick-film insulation system developed for aluminum that cannot handle temperature higher than 660 °C. The coefficient of thermal expansion of IAMS pastes is designed to match with aluminum, which minimizes any bowing. The thermal via underneath the LED enables excellent thermal performance. More than 7°C reduction in LED junction temperature at 700-mA drive current and 27% reduction in the total thermal resistance from the LED junction to the bottom of the substrate were demonstrated for the IAMS technology when compared with MCPCB. When considering only the thermal resistance of the substrate, reductions of around 70% and 50% were obtained. This versatile and low-cost material system has the potential to make LEDs even more attractive in lighting applications.

Published in:

IEEE Transactions on Components, Packaging and Manufacturing Technology  (Volume:2 ,  Issue: 12 )