Skip to Main Content
Your organization might have access to this article on the publisher's site. To check, click on this link:http://dx.doi.org/+10.1063/1.4726018
In this paper, a novel design concept for roll-to-roll printing equipment used for manufacturing printed electronic devices by multi-layer printing is presented. The roll-to-roll printing system mainly consists of printing units for patterning the circuits, tension control components such as feeders, dancers, load cells, register measurement and control units, and the drying units. It has three printing units which allow switching among the gravure, gravure-offset, and flexo printing methods by changing the web path and the placements of the cylinders. Therefore, depending on the application devices and the corresponding inks used, each printing unit can be easily adjusted to the required printing method. The appropriate printing method can be chosen depending on the desired printing properties such as thickness, roughness, and printing quality. To provide an example of the application of the designed printing equipment, we present the results of printing tests showing the variations in the printing properties of the ink for different printing methods.