System Maintenance:
There may be intermittent impact on performance while updates are in progress. We apologize for the inconvenience.
By Topic

A Variation Tolerant Current-Mode Signaling Scheme for On-Chip Interconnects

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
4 Author(s)
Dave, M. ; Dept. of Electr. Eng., Indian Inst. of Technol. (IIT) Bombay, Mumbai, India ; Jain, M. ; Shojaei Baghini, M. ; Sharma, D.

Current-mode signaling (CMS) with dynamic overdriving is one of the most promising scheme for high-speed low-power communication over long on-chip interconnects. However, they are sensitive to parameter variations due to reduced voltage swings on the line. In this paper, we propose a variation tolerant dynamic overdriving CMS scheme. The proposed CMS scheme and a competing CMS scheme (CMS-Fb) are fabricated in 180-nm CMOS technology. Measurement results show that the proposed scheme offers 34% reduction in energy/bit and 42% reduction in energy-delay-product over CMS-Fb scheme for a 10 mm line operating at 0.64 Gbps of data rate. Simulations indicate that the proposed CMS scheme consumes 0.297 pJ/bit for data transfer over the 10 mm line at 2.63 Gb/s. Measurements indicate that the delay of CMS-Fb becomes 2.5 times its nominal value in the presence of intra-die variations whereas the delay of the proposed scheme changes by only 5% for the same amount of intra-die variations. Measurement and simulation results show that both the schemes are robust against inter-die variations. Experiments and simulations also indicate that the proposed CMS scheme is more robust against practical variations in supply and temperature as compared to CMS-Fb scheme.

Published in:

Very Large Scale Integration (VLSI) Systems, IEEE Transactions on  (Volume:21 ,  Issue: 2 )