Skip to Main Content
Partially reflecting surfaces (PRS) with positive reflection phase gradients are investigated for the design of wideband, low-profile electromagnetic band gap (EBG) resonator antennas. Thin single-dielectric-slab PRSs with printed patterns on both sides are proposed to minimize the PRS thickness and to simplify fabrication. Three such surfaces, each with printed dipoles on both sides, have been designed to obtain different positive reflection phase gradients and reflection magnitude levels in the operating frequency bands. These surfaces, and the EBG resonator antennas formed from them, are analyzed theoretically and experimentally to highlight the design compromises involved and to reveal the relationships between the antenna peak gain, gain bandwidth, the reflection profile (i.e., positive phase gradient and magnitude) of the surface and the relative dimensions of dipoles. A small feed antenna, designed to operate in the cavity field environment, provides good impedance matching (|S11| <; -10 dB) across the operating frequency bands of all three EBG resonator antennas. Experimental results confirm the wideband performance of a simple, low-profile EBG resonator antenna. Its PRS thickness is only 1.6 mm, effective bandwidth is 12.6%, measured peak gain is 16.2 dBi at 11.5 GHz and 3 dB gain bandwidth is 15.7%.