By Topic

Enhanced Output Power of GaN-Based Resonance Cavity Light-Emitting Diodes With Optimized ITO Design

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

Formats Non-Member Member
$31 $13
Learn how you can qualify for the best price for this item!
Become an IEEE Member or Subscribe to
IEEE Xplore for exclusive pricing!
close button

puzzle piece

IEEE membership options for an individual and IEEE Xplore subscriptions for an organization offer the most affordable access to essential journal articles, conference papers, standards, eBooks, and eLearning courses.

Learn more about:

IEEE membership

IEEE Xplore subscriptions

7 Author(s)
Tzeng-Tsong Wu ; Dept. of Photonics, Nat. Chiao Tung Univ., Hsinchu, Taiwan ; Chien-Chung Lin ; Yun-Lin Wu ; Chien-Kang Chen
more authors

We fabricated and measured GaN-based resonant cavity light-emitting diodes with a 30 nm thick Indium tin oxide (ITO) thin film as a transparent contact layer. Four different ITO structures on p-type GaN samples were deposited by sputter and e-gun, and the corresponding device performance was compared. Each of these four samples has been annealed by its optimal parameters. The ITO thin film deposited by sputter demonstrated better electrical characteristics, surface morphology, specific contact resistance, and the overall device light output compared to those of the e-gun samples. Between the two sputtered ITO types, the hybrid type shows higher roll-over current density of 14 kA/cm2, and the output power is increased from 15 to 39 μ W. From statistical data of the 2-D light intensity under the same current, we saw the lateral current spreading of the pure crystalline ITO by sputter is worst. The hybrid type, which combines the crystalline and amorphous ITO, has the best overall performance when we consider all the electrical, optical, and metrology measurements. From these results, we believe the 30 nm thick hybrid ITO thin film has the best potential to be applied in light emitting devices such as light-emitting diodes, laser diodes, etc.

Published in:

Lightwave Technology, Journal of  (Volume:29 ,  Issue: 24 )