By Topic

Nanoimprint mold fabrication and duplication for embedded servo and discrete track recording media

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

The purchase and pricing options are temporarily unavailable. Please try again later.
8 Author(s)
Tan, E.L. ; Data Storage Institute, (A*STAR) Agency for Science, Technology and Research, 5 Engineering Drive 1, Singapore 117608, Singapore ; Aung, K.O. ; Sbiaa, R. ; Wong, S.K.
more authors

Your organization might have access to this article on the publisher's site. To check, click on this link: 

A master mold for nanoimprint lithography was fabricated for discrete track recording (DTR) media using electron beam lithography and conventional etching techniques. The DTR pattern, containing 167 tracks of 120 nm pitch (60 nm land and groove widths) and embedded servo information, was automatically generated using an in-house developed program and was optimized for faster electron beam writing on an x-y stage. A daughter mold was duplicated from the master mold by nanoimprinting, using UV-curable resist and an intermediate polymer stamp technique. Scanning electron microscope images showed that the daughter mold was accurately and completely reproduced from the master mold.

Published in:

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures  (Volume:27 ,  Issue: 5 )