Skip to Main Content
We report a 2-step approach to prepare tetragonal perovskite PbZr0.1Ti0.9O3 submicro/nano wires in gram scale and with over 95% wire content. Non-perovskite precursor wires were first fabricated by hydrothermal processing. A subsequent annealing in a PbO atmosphere at 600degC converted these wires into perovskite structures which retain the one-dimensional shape. Binding of the perovksite nanowires to a conductive substrate could be achieved by a similar heat treatment of the non-perovskite precursor wires on a flat Pt coated substrate. Taking advantage of the strong mechanical attachment and good electrical contact between the wires and the metallic layer, piezoresponse force microscopy (PFM) was used to measure the local piezoelectric and ferroelectric properties of the individual wires. Enhanced piezoelectric response relative to sputtered epitaxial PbZr0.2Ti0.8O3 film and squared hysterisis loop with sharp switching indicate pronounced electro- mechanical and ferroelectric behavior. The 90deg domain structure of the as-prepared perovskite PZT wires was confirmed by both PFM and transmission electron microscopy investigations.
Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on (Volume:56 , Issue: 9 )
Date of Publication: September 2009