The outstanding properties of SiO2, which include high resistivity, excellent dielectric strength, a large band gap, a high melting point, and a native, low defect density interface with Si, are in large part responsible for enabling the microelectronics revolution. The Si/SiO2 interface, which forms the heart of the modern metal–oxide–semiconductor field effect transistor, the building block of the integrated circuit, is arguably the worlds most economically and technologically important materials interface. This article summarizes recent progress and current scientific understanding of ultrathin (≪4 nm) SiO2 and Si–O–N (silicon oxynitride) gate dielectrics on Si based devices. We will emphasize an understanding of the limits of these gate dielectrics, i.e., how their continuously shrinking thickness, dictated by integrated circuit device scaling, results in physical and electrical property changes that impose limits on their usefulness. We observe, in conclusion, that although Si microelectronic devices will be manufactured with SiO2 and Si–O–N for the foreseeable future, continued scaling of integrated circuit devices, essentially the continued adherence to Moore’s law, will necessitate the introduction of an alternate gate dielectric once the SiO2 gate dielectric thickness approaches ∼1.2 nm. It is hoped that this article will prove useful to members of the silicon microelectronics community, newcomers to the gate dielectrics field, practitioners in allied fields, and graduate students. Parts of this article have been adapted from earlier articles by the authors [L. Feldman, E. P. Gusev, and E. Garfunkel, in Fundamental Aspects of Ultrathin Dielectrics on Si-based Device- s, edited by E. Garfunkel, E. P. Gusev, and A. Y. Vul’ (Kluwer, Dordrecht, 1998), p. 1 [Ref. 1]; E. P. Gusev, H. C. Lu, E. Garfunkel, T. Gustafsson, and M. Green, IBM J. Res. Dev. 43, 265 (1999) [Ref. 2]; R. Degraeve, B. Kaczer, and G. Groeseneken, Microelectron. Reliab. 39, 1445 (1999) [Ref. 3]. © 2001 American Institute of Physics.