Skip to Main Content
Computational modeling effectively analyzes the wave propagation and associated interaction within heterogeneous reinforced concrete bridge decks, providing valuable information for sensor selection and placement. It provides a good basis for the implementation of the inverse problem in defect detection and the reconstruction of subsurface properties, which is beneficial for defect diagnosis. The objective of this study is to evaluate the effectiveness of lower order models in the evaluation of bridge-deck subsurfaces modeled as layered media. The two lower order models considered are a 2-D model and a 2.5-D model that uses the 2-D geometry with a compressed coordinate system to capture wave behavior outside the cross-sectional plane. Both the 2- and 2.5-D models are compared to the results obtained from a full 3-D model. A filter that maps the 3-D excitation signal appropriately for 2- and 2.5-D simulations is presented. The 2.5-D model differs from the 2-D model in that it is capable of capturing 3-D wave behavior interacting with a 2-D geometry. The 2.5-D matches results from the corresponding 3-D model when there is no variation in the third dimension. Computational models for air-launched ground-penetrating radar with 1-GHz central frequency and bandwidth for the detection of bridge-deck delamination are implemented in 2-, 2.5-, and 3-D using FDTD simulations. In all cases, the defect is identifiable in the results. Thus, it is found that in layered media (such as bridge decks) 2- and 2.5-D models are good approximations for modeling bridge-deck deterioration, each with an order of magnitude reduction in computational time.
Geoscience and Remote Sensing, IEEE Transactions on (Volume:47 , Issue: 11 )
Date of Publication: Nov. 2009