REFERENCES TO OTHER PUBLISHERS
- ANSI T1.105-1995-TelecommunicationsSynchronous Optical Network (SONET)Basic Description including Multiplex Structure, Rates and Formats.
- ANSI T1.269-2000-Information InterchangeStructure and Representation of Trace Message Formats For The North American Telecommunications System.
- ANSI T1.416-1999-TelecommunicationsNetwork to Customer Installation InterfacesSynchronous Optical Network (SONET) Physical Layer Specification: Common Criteria.
- ANSI T1.417-2001-Spectrum Management For Loop Transmission Systems.
- ANSI T1.424-2004-Interface between networks and customer installationsVery-high Speed Digital Sub-scriber Lines (VDSL) Metallic Interface (Trial-Use Standard).
- ANSI T1.601-1992-TelecommunicationsIntegrated Services Digital Network (ISDN)Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification).
- ANSI T1.605-1991-TelecommunicationsIntegrated Services Digital Network (ISDN)Basic Access Interface for S and T Reference Point (Layer 1 Specification).
- ANSI X3.230-1994 (FC-PH)-Information TechnologyFibre ChannelPhysical and Signaling Interface.
- ANSI X3.263-1995, Revision 2.2 (1 March 1995)-FDDI Twisted PairPhysical Medium Dependent (TP-PMD).
- ANSI/EIA-455-95A-2000-Absolute Optical Power Test for Optical Fibers and Cables.
- ANSI/EIA/TIA-455-127-1991-FOTP-127Spectral Characterization of Multimode Laser Diodes.
- ANSI/TIA-568-B.2-10-2008-Transmission Performance Specifications for 4-pair 100 Augmented Cate-gory 6 Cabling.
- ANSI/TIA/EIA-455-175A-92-Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method.
- ANSI/TIA/EIA-455-203-2001-Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters.
- ANSI/TIA/EIA-455-204-2000-Measurement of Bandwidth on Multimode Fiber.
- ANSI/TIA/EIA-568-A-Commercial Building Telecommunications Cabling Standard.
- ANSI/TIA/EIA-568-B.3-2000-Optical Fiber Cabling Components Standard.
- ANSI/TIA/EIA-568-B:2001-Commercial Building Telecommunications Cabling Standard.
- CISPR 22: 1993-Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
- EIA/JEDEC Standard EIA/JESD8-6-High Speed Transceiver Logic (HSTL), August 1995.
- ETSI TS 270-2 (2001)-Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 2: Transceiver specification.
- ETSI TS1 101 270-1 (1999)-Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements.
- IEC 60060 (all parts)-High-voltage test techniques.
- IEC 60068-Basic environmental testing procedures.
- IEC 60096-1:1986-Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993.
- IEC 60169-8:1978 and -16:1982-Radio-frequency connectors, Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lockCharacteristic impedance 50 ohms (Type BNC); Part 16: R.F. coaxial connectors with inner
- IEC 60603-7:1990-Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.
- IEC 60793-1-41:2001-Optical fibresPart 1-41: Measurement methods and test proceduresBandwidth.
- IEC 60793-1:1995-Optical fibresPart 1: Generic specification.
- IEC 60793-2-10 (2004)-Optical fibresPart 2-10: Product specificationsSectional specification for cate-gory A1 multimode fibres.
- IEC 60793-2:1992-Optical fibresPart 2: Product specifications.
- IEC 60794-1:1996-Optical fibre cablesPart 1: Generic specification.
- IEC 60794-2-11 (2005)-Optical fibre cablesPart 2-11: Indoor cablesDetailed specification for simplex and duplex cables for use in premises cabling.
- IEC 60794-2:1989-Optical fibre cablesPart 2: Product specifications.
- IEC 60794-3-12 (2005)-Optical fibre cablesPart 3-12: Outdoor fibre cablesDetailed specification for duct and directly buried optical telecommunication cables for use in premises cabling.
- IEC 60807-2:1992-Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contactsFixed solder contact types.
- IEC 60807-3:1990-Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contactsRemovable crimp contact types with closed crimp barrels, rear insertion/re
- IEC 60825-1:2001, Edition 1.2-Consolidated Edition; Safety of Laser ProductsPart 1: Equipment classifi-cation, requirements and users guide.
- IEC 60825-2:1993, Safety of laser productsPart 2-Safety of optical fibre communication systems.
- IEC 60874-10:1992-Connectors for optical fibres and cablesPart 10: Sectional specification, Fibre optic connector type BFOC/2,5.
- IEC 60874-1:1993-Connectors for optical fibres and cablesPart 1: Generic specification.
- IEC 60874-2:1993-Connectors for optical fibres and cablesPart 2: Sectional specification for fibre optic connector, Type F-SMA.
- IEC 60950-1:2001-Information technology equipmentSafetyPart 1: General requirements.
- IEC 60950:1991-Safety of information technology equipment.
- IEC 61000-4-3-Electromagnetic Compatibility (EMC)Part 4: Testing and measurement techniquesSection 3: Radiated, radio-frequency, electromagnetic field immunity test.
- IEC 61076-3-101:1997-Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applicationsPart 3: Rectangular connectorsSection 101: Detail specification for a range of shielded connectors with trapezoidal s
- IEC 61076-3-103 (48B/574/NP)-Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, fixed and free shielded connectors with ribbon contacts for high speed data applications.
- IEC 61076-3-113, Ed. 1.0 (draft, 48B/1437/CD, 2 April 2004.)-[48B Secretariat 1327] Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates.


