By Topic

Performance evaluation of the low-cost high-sensitivity rodent research PET (RRPET) camera using Monte Carlo simulations

Sign In

Cookies must be enabled to login.After enabling cookies , please use refresh or reload or ctrl+f5 on the browser for the login options.

Formats Non-Member Member
$31 $13
Learn how you can qualify for the best price for this item!
Become an IEEE Member or Subscribe to
IEEE Xplore for exclusive pricing!
close button

puzzle piece

IEEE membership options for an individual and IEEE Xplore subscriptions for an organization offer the most affordable access to essential journal articles, conference papers, standards, eBooks, and eLearning courses.

Learn more about:

IEEE membership

IEEE Xplore subscriptions

10 Author(s)

BGO pentagonal blocks are used to build a solid detector cylinder for a rodent research PET (RRPET). With the PMT-quadrant-sharing design, this camera is low-cost and has higher sensitivity than commercial animal PET. The performance parameters of RRPET are obtained using Monte Carlo simulations by GATE, a newly developed toolkit based on GEANT4 for PET/SPECT. Two models of the RRPET system, one 30-sided-polygon geometry model and one 10-sided-polygon electronics model with different time-response constants, are used in the simulations to get the accurate results for both geometry-related and time-related parameters, including the sensitivity, count rate and resolution. Several types of sources are simulated, including a point source, a linear source, and several uniform sources simulating the mouse and the rat. The simulations give the noise equivalent count rate (NECR) curves with the maximum NECR of 2.2 Mcps @ 1.5 mCi for point source, 750 kcps @ 1.5 mCi for mouse-like source and 290 kcps @ 1.0 mCi for rat-like source; the sensitivity is 10.3%; the spatial resolution at the center of the field of view (FOV) is 1.6 mm for an 18F source inside water phantom; the radial and tangential resolution at the edge of the FOV (10 cm) is 3.2 mm and 2.2 mm, respectively. Preliminary experiments showed a sensitivity of 8.4% to 10.2% (depending on electronics) and a resolution of 1.8 mm with a 22Na source. By comparing the simulation and experiment results, the resolution degradation from the mechanical misalignment and the block-decoding blurring is found to be 1.1 mm

Published in:

Nuclear Science Symposium Conference Record, 2005 IEEE  (Volume:5 )

Date of Conference:

23-29 Oct. 2005